Iot PC

Do Regular Cleaning For The Ventilation Section
Heat is the main enemy of almost all electronic devices, especially computers.a stable temperature does need so that the laptop's components remain cool.the internal components generate heat all the time. A cooling or fan is required so that heat dissipation can run smoothly.
You also have to clean the vents regularly and periodically to maintain the life of the Motherboard.

Avoid Short Circuits On The Motherboard
Short circuits or electrical circuits often occur due to minor errors, often without even realizing it, for example, for people who like to assemble or modify computers.
When assembling the PC, the Mobo must remain securely in the housing. the screws on the Mobo must be installed neatly so the board can stay firmly in place.
Apart from the Mobo, other components must also be placed and installed correctly where they should be. Because if there is looseness in the parts that damage the Motherboard, it cannot be repaired.

Using A Stabilizer So That The Electric Power Does The Controlled
Power supply with the Motherboard has a relationship with each other. Therefore the selection of the PSU must follow the motherboard series used.
Most motherboards and PSUs can adjust the voltage to accommodate lower power. However, if the range cannot be changed, it will burn all the components on the Motherboard.
This condition is undoubtedly dangerous, especially for those who subscribe to 450 Watt electricity. This is because the average PSU model requires around 400-500 watts.a stabilizer is needed so that the electrical power that goes to the PC remains stable and does not fluctuate.

Immediately Check The Motherboard In Case Of Damage
Almost all Mobo brands have a self-diagnostic tool. This tool is used to diagnose damage that might occur. If a fault occurs, the Motherboard will emit a beeping sound (this sound may differ depending on the factory settings of each).
If damage has occurred, the steps you can take are between repairing or buying a new Mobo. If you buy a new Mobo, then you have to make sure that the Mobo you are purchasing must be compatible with other components such as RAM, PSU, and processor.

Cleaning The Motherboard From Dust
The main factor for motherboard damage is dust. It sounds trivial, mainly since dust that has already accumulated can clog the exhaust window and cooling fan. This is what makes the computer heat up faster.
The way to clean dust is to use a small soft brush. Remember that this dust cleaning process must do carefully so as not to create scratches on computer components.

Try Not To Use The Computer For Too Long
Should not use PC or computer for too long. Because the computer needs time to rest all components, they only work up to their limits.try to turn off the computer immediately after use.

Check The Capacitor
If the capacitor or condenser swells or bulges, it indicates that the Motherboard on your computer is damaged.the Motherboard cannot function properly.
If this condition occurs, you can replace the capacitor with a new one. The trick is to go to an official service location from your computer so that a professional technician can handle it.

Check The Fan Function
You should regularly check the fan function. This aims to determine whether the device is still functioning normally.
If it is not functioning normally, you must immediately replace it with a new fan or another fan to prevent overheating.
if the fan is still running fine, then you need to gently and carefully clean it with an alkaline tissue

Turn On The PC Periodically
Apart from not being used for too long, the PC should be fine for a long time. Because if the PC is disabled for a long time, it can damage the Motherboard.
If left off for a long time, the components in the PC will cool down and can short out when used again. The recommendation is to use a PC at least three times weekly so its features are flexible.

Check The Charger Input Cable
An unstable voltage or power supply is also one of the causes of damage to the Motherboard. This damage is in the form of fire on the Motherboard or total damage.
Buy an original charger or battery according to computer specifications so that the electric current remains stable and does not fluctuate.

Removing All Components On The Motherboard Before Cleaning It
The thing you must do before cleaning the Motherboard is to remove all components or peripherals that are still attached. Apart from that, you must remove the cables that connect to the Motherboard. How to remove these cables using a screwdriver.
Removing all the components on the Motherboard before cleaning prevents an electric shock from occurring that can electrocute you. In addition, it also makes it easier for you to clean ports and sockets that contain dirt and dust.

Use A Soft Brush To Clean The Motherboard
To avoid scratches on the Motherboard board and sensitive components, it can use a small brush with soft bristles when cleaning it. Because if the port or socket is scratched or broken, it can make the motherboard performance not optimal.